Temperature Transducer with mounting block, and tension band, 1-wire

SKU: LF2/B-1W

Category: Contacting

Manufacturers: FuehlerSysteme

-30...+110°C
DS18B20+ digital sensor
incl. clamping band
protection type IP65

Sensor: DS18B20+ (12 Bit, ±0,5 K)
Serial number: dec

hex

n/a
Temperature: -30...+110°C

Available immediately

from 39,55 €

excl. 19% VAT , plus

This item has variations. Please select the requested variation.

The LF2/B-1W cable sensor measures the surface temperature from pipes in the range of -30 up to +110°C and converts the measured value into a digital output signal. The resolution of the conversion is configurable from 9-bit to 12-bit (0,5/0,25/0,125/0,0625 K). The 1-Wire protocol allows a cost efficient wiring of multiple sensing devices as series, ring or tree topology in 2- or 3-wire connection. Optionally, each device has a serial number label, whereby a quick and easy start-up is possible. By the in scope of delivery stainless steel clamping band the aluminium block at the housing bottom side can be mounted fast and safe directly e.g. on cold and hot water pipes of heating installation. The robust housing allows the use in rough environment conditions.

Measurement range temp.:	-30...+110°C, -30...+85°C (2-wire connection, parasite powered)
Accuracy:	±0,5 K (-10...+85°C), sonst ±2 K
Sensor:	DS18B20+
Circuit type:	2-, 3-wire connection
Supply voltage:	3...5,5 V
Current consumption:	typ. 1,5 mA
Electrical connection:	screw terminals max. 1,5 mm²
Resolution:	9-12 Bit (+0,5°C up to +0,0625°C)
Material:	Contacting block: aluminium
Cable gland:	PG11 high-strength cable gland with strain relief
Housing:	polyamide with snap closing screws, colour white like RAL 9010
Dimensions:	Housing: L 64 x W 58 x H 34,5 mm
Protection type:	IP65
Protection class:	III
Working temperature:	-30...+110°C
Storage temperature:	-20...+70°C
Installation:	clamping band, band width 9 mm, chucking capacity 50-110 mm, galvanized steel (in scope of delivery)
Approvals:	CE, EAC, RoHS