Dew Point Controller with mounting block, and tension band, with LED display, with changeover contact, 0-10 V or 4-20 mA

SKU: TW/A

Category: Dew Point Controllers

Manufacturers: FuehlerSysteme

0...100% r.H.
protection against condensate
0-10 V, 4-20 mA, relay
hinge lock technology

Output r.H.: 0-10 V

4-20 mA

change-over contact
Equipment: without

LED-Display
Humidity: 0-100% r.H.

Available immediately

from 141,58 €

excl. 19% VAT , plus

This item has variations. Please select the requested variation.

The dew point controller TW/A measures the relative humidity 0...100% r.H. via the contact surface of the contact block, e.g. on cooled pipes, surfaces or cooling ceilings. For further processing, it provides a linear output signal 0-10 V, 4-20 mA or a change-over contact. The dew point controller with change-over contact has a 2-digit LED display which visualize the actual value of % r.H., the limit setting 5...95% r.H. and the exceeding of the limit. The sensor element is mounted inside the contacting block and is protected by a sinter plate. Due to its geometric shape the dew point controller allows an easy mounting on pipes by a tension band.

Measurement range r.H.:	0-100% r.H.
Accuracy humidity:	±3% r.H. (30-70% r.H., else ±5% r.H., at 20°C)
Long term stability:	±1%/year
Sensor protection:	sinter filter, sensor mounted inside the contact block
Supply voltage analog 0-10 V:	24 V AC/DC (±5%)
Supply voltage analog 4-20 mA:	15...36 V DC (Ubmin = 15 V + RLoad*0,02A)
Supply voltage at relay:	24 V AC/DC (±5%)
Current consumption at 0-10 V:	typ. 10 mA
Current consumption at 4-20 mA:	max. 20 mA / output
Current consumption at relay:	max. 30 mA
Analogue output 0-10 V:	3-wire connection, load current < 0,1 mA
Analogue output 4-20 mA:	2-wire connection (transmitter), max. RLoad(Ohm) = (+Ub - 15 V) / 0,02 A
Alarm output:	1 x potential-free change-over contact, 48 V, 1 A
Switching Hysteresis Relay:	0,03
Electrical connection:	screw terminals max. 1,5 mm²
Display:	2-digit LED display for visualization of actual value and limit setting / exceeded
Flow rate:	< 2 m/s
Cable gland:	PG11 high-strength cable gland with strain relief
Housing:	Polycarbonate PC UL 94 V0 with hinge locks, color signal white similar to RAL 9003
Dimensions:	Housing: L 89 x W 80 x H 47 mm
Protection type:	Housing/electronic: IP65, Sensor: IP30
Protection class:	III
Working range r.H.:	0...98% r.H. in contaminant-free, non-condensing air
Working temperature:	0...+50°C
Storage temperature:	-20...+50°C
Installation:	clamping band, band width 9 mm, chucking capacity 50-110 mm, galvanized steel (in scope of delivery)
Approvals:	CE, EAC, RoHS

Tension band, clamping range 60-110 mm galvanized steel

3,00 € *

Delivery time: 6 - 7 Workdays (DE - int. shipments may differ)