1-wire cable temperature sensor with silicone cable

SKU: KS/B-1W

Category: Cable

Manufacturers: FuehlerSysteme

-55...+125°C
DS18B20+ digital sensor
protection type IP67
silicone cable

Cable: 2 m silicone (3x0,25 mm²)

5 m silicone (3x0,25 mm²)
Sensor: DS18B20+ (12 Bit, ±0,5 K)
Serial number: dec

hex

n/a
Temperature: -55...+125°C

Available immediately

from 25,52 €

excl. 19% VAT , plus

This item has variations. Please select the requested variation.

The KS/B-1W cable probe measures the temperature in the range of -55 up to +125°C in gasiform or liquid medium and converts the measured value into a digital output signal. The resolution of the conversion is configurable from 9-bit to 12-bit (0,5/0,25/0,125/0,0625 K). The 1-Wire protocol allows a cost efficient wiring of multiple sensing devices as series, ring or tree topology in 2- or 3-wire connection. Optionally, each device has a serial number label, whereby a quick and easy start-up is possible. The stainless steel sleeve protects the sensor e.g. against mechanical impacts, is with the cable moisture sealed rolled and can be mounted by an immersion sleeve, tension band or compression clamp.

Measurement range temp.:	-55...+125°C, -30...+85°C (2-wire connection, parasite powered)
Accuracy:	±0,5 K (-10...+85°C), sonst ±2 K
Sensor:	DS18B20+
Circuit type:	2-, 3-wire connection
Supply voltage:	3...5,5 V
Current consumption:	typ. 1,5 mA
Electrical connection:	stripped ends with ferrules
Resolution:	9-12 Bit (+0,5°C up to +0,0625°C)
Cable:	silicone cable (3x0,25 mm², max. +180°C) with core cable ends in different lengths
Material:	Protection sleeve: stainless steel VA 1.4571
Dimensions:	Protection sleeve: Ø 6 x 50 mm
Protection type:	IP67 (moisture sealed rolled)
Protection class:	III
Storage temperature:	-20...+70°C
Installation:	immersion sleeve, mounting flange, compression fitting (not in scope of delivery)
Approvals:	CE, EAC, RoHS