Temperature Transducer with remote cable sensor, with silicone line, with display, with changeover contact, 0-10 V or 4-20 mA

SKU: KSM/E

Category: Cable

Manufacturers: FuehlerSysteme

-50...+180°C
16 measuring ranges per device
output 0-10 V, 4-20 mA
DIP-switch-technology
optional with LCD-Display
protection type IP65/IP67
hinge lock technology

Output temperature: 0-10 V

0-10 V, 2 changer

4-20 mA

4-20 mA, 2 changer
Cable: 2 m silicone (2x0,22 mm²)
MR temp. preset: 0...+100°C
Version: with display

without display

Available immediately

from 124,92 €

excl. 19% VAT , plus

This item has variations. Please select the requested variation.

The KSM/E cable transducer registers the temperature in gaseous and liquid media and converts this measured value into a linear output signal 0-10 V respectively 4-20 mA. As an option the temperature transducer has two potential-free changeover contacts and a backlit display. The display content can be rotated in 90° steps using a menu and the measured value, the switching threshold set, the state of the respective relay, the MIN/MAX measured values for the selected intervals(1 h / 6 h / 12 h / 24 h) etc. can be read out. On the display version the user can, via the menu, specify an individual temperature range. The stainless steel sleeve protects the sensor, e.g. from mechanical shocks, is rolled moisture proof (waterproof) with the connecting cable and can, using the immersion sleeve, strap or clamping screws be quickly and easily mounted.

Measurement range temp.:	-50...+180°C
Measurement range configuration:	1 freely programmable measuring range via the menu input in the display (span min. 25K)
Scales:	-50...0°C, -50...+50°C, -50...+150°C, -30...+20°C, -30...+70°C, -20...+50°C, -20...+80°C, -20...+120°C, -20...+150°C, -10...+15°C, 0...+50°C, 0...+100°C, 0...+150°C, 0...+200°C, 0...+250°C, +10...+35°C
Accuracy:	±0,2 K + max. ±1,5% Span
Supply voltage analog 0-10 V:	24 V AC/DC (±5%)
Supply voltage analog 4-20 mA:	15...36 V DC, depends on liability (Ubmin = 15 V + Rload*0,02A)
Current consumption at 0-10 V:	typ. 10 mA, 30 mA peak current consumption for 50 ms at switching moment at option relay
Current consumption at 4-20 mA:	max. 20 mA / output, 40 mA peak current consumption for 50 ms at switching moment at option relay
Analogue output 0-10 V:	3-wire connection, min. load resistance 100 kOhm
Analogue output 4-20 mA:	2-wire connection (transmitter), max. RLoad(Ohm) = (+Ub - 15 V) / 0,02 A
Alarm output:	2 x potential-free change-over contact, 48 V, 1 A
Switching Hysteresis Relay:	Temperature: 2K (without display), 0,5...5K adjustable (with display)
Electrical connection:	screw terminals max. 1,5 mm²
Display:	optional LCD display with backlight on/off/auto
Cable:	2 m silicone cable (max. +180°C)
Material:	Protection sleeve: stainless steel VA 1.4571
Cable gland:	PG11 high-strength cable gland with strain relief
Housing:	Polycarbonate PC UL 94 V0 with hinge locks, color signal white similar to RAL 9003
Dimensions:	Housing: L 89 x W 80 x H 47 mm, Protection sleeve: Ø 6 x 50 mm
Protection type:	IP65, IP67 (probe, moisture sealed rolled)
Protection class:	III
Working range r.H.:	0...98% r.H. in contaminant-free, non-condensing air
Working temperature:	Probe: -50...+180°C, Electronic: -20...+70°C
Storage temperature:	-20...+70°C
Installation:	screw fastening
Approvals:	CE, EAC, RoHS