Temperature Transducer for flush mounting, 0-10 V or 4-20 mA

SKU: UM1/E

Category: Room

0...+50°C
output 0-10V, 4-20 mA
GIRA standard 55

Output temperature: 0-10 V

4-20 mA
MR temp. preset: 0...+50°C
Light switch program: GIRA Standard 55, pure white satin

128,84 €

excl. 19% VAT , plus

This item has variations. Please select the requested variation.

The UM1/E flush-mounted temperature transducer registers the temperature via the sensor in the housing and converts this measured value into a linear output signal 0-10 V respectively 4-20 mA. The room temperature transducer is, e.g. in offices or flats, fitted to the flush-mounted socket and is available in all common switching programmes. In the event of a deviation from the reference temperature the fine calibration can be performed directly on the device.

Measurement range temp.:	0...+50°C
Scales:	-50...0°C, -50...+50°C, -50...+150°C, -30...+20°C, -30...+70°C, -20...+50°C, -20...+80°C, -20...+120°C, -20...+150°C, -10...+15°C, 0...+50°C, 0...+100°C, 0...+150°C, 0...+200°C, 0...+250°C, +10...+35°C
Accuracy:	±0,2 K + max. ±1,5% Span
Supply voltage analog 0-10 V:	24 V AC/DC (±5%)
Supply voltage analog 4-20 mA:	15...36 V DC, depends on liability (Ubmin = 15 V + Rload*0,02A)
Current consumption at 0-10 V:	typ. 10 mA
Current consumption at 4-20 mA:	max. 20 mA / output
Analogue output 0-10 V:	3-wire connection, min. load resistance 100 kOhm
Analogue output 4-20 mA:	2-wire connection (transmitter), max. RLoad(Ohm) = (+Ub - 15 V) / 0,02 A
Electrical connection:	push terminals max. 1,5 mm²
Light switch program:	Busch Jäger (BJ), Gira (G), Jung (J), Berker (B), Merten (M)
Protection type:	IP20
Protection class:	III
Working range r.H.:	0...98% r.H. in contaminant-free, non-condensing air
Working temperature:	Electronic: -20...+70°C
Storage temperature:	-20...+70°C
Installation:	onto in-wall junction box, diameter 55 mm
Approvals:	CE, EAC, RoHS