Temperature Transducer for screw-in mounting, Form B, with screw-in immersion sleeve

SKU: EM3/E

Category: Screw-In

Manufacturers: FuehlerSysteme

-30...+180°C
output 0-10 V, 4-20 mA
16 measuring ranges per device
DIP-switch-technology
protection type IP65
Pmax. 40 bar

Output temperature: 0-10 V

4-20 mA
Installation length: 100 mm

200 mm

300 mm

400 mm
MR temp. preset: 0...+100°C

Available immediately

from 191,27 €

excl. 19% VAT , plus

This item has variations. Please select the requested variation.

The screwable transducer with connection head form B registers the temperature in a range of -30...+180°C at a maximum pressure of 40 bar in gaseous and liquid media and converts this measured value into a linear output signal 0-10 V respectively 4-20 mA. Using the stainless steel immersion sleeve, with G1/2 inch thread, the temperature transducer is screwed directly into the container or the pipeline and can during service be quickly and easily replaced.

Measurement range temp.:	-30...+180°C
Scales:	-50...0°C, -50...+50°C, -50...+150°C, -30...+20°C, -30...+70°C, -20...+50°C, -20...+80°C, -20...+120°C, -20...+150°C, -10...+15°C, 0...+50°C, 0...+100°C, 0...+150°C, 0...+200°C, 0...+250°C, +10...+35°C
Accuracy:	±0,2 K + max. ±1,5% Span
Supply voltage analog 0-10 V:	24 V AC/DC (±5%)
Supply voltage analog 4-20 mA:	15...36 V DC, depends on liability (Ubmin = 15 V + Rload*0,02A)
Current consumption at 0-10 V:	typ. 10 mA
Current consumption at 4-20 mA:	max. 20 mA / output
Analogue output 0-10 V:	3-wire connection, min. load resistance 100 kOhm
Analogue output 4-20 mA:	2-wire connection (transmitter), max. RLoad(Ohm) = (+Ub - 15 V) / 0,02 A
Electrical connection:	push-in terminals, max. 1,5 mm²
Material:	Protection sleeve: stainless steel VA 1.4571, Immersion sleeve: stainless steel VA 1.4571, Pmax. 40 bar
Cable gland:	M20x1,5 cable gland with strain relief
Housing:	terminal head form B , aluminium, colour grey
Dimensions:	Protection sleeve: Ø 6 mm, Immersion sleeve: outside Ø 9 mm / inside Ø 6,5 mm, thread G1/2 inch
Protection type:	IP54
Protection class:	III
Working range r.H.:	0...98% r.H. in contaminant-free, non-condensing air
Working temperature:	Probe: -30...+180°C, Electronic: -20...+70°C
Storage temperature:	-20...+70°C
Installation:	immersion sleeve with G1/2 inch screw-in thread
Approvals:	CE, EAC, RoHS