Screw-in temperature sensor with stainless steel immersion sleeve

SKU: EF2/E

Category: Screw-In

Manufacturers: FuehlerSysteme

-30...+150°C
PT100, PT1000, Ni, NTC, KTY
stainless steel sleeve (40 bar)

Sensor
Installation length

Available immediately

from 54,21 €

excl. 19% VAT , plus

This item has variations. Please select the requested variation.

The EF2/E screw-in sensor measures the temperature in the range of -30 up to +150°C at a max. pressure of 40 bar in gasiform as well as liquid medium and is with all current sensors available. With the in scope of delivery brass immersion sleeve the temperature probe can be mounted directly in bin or pipes and replaced quickly and easily in case of service.

Measurement range temp.:	-30...+150°C
Sensor:	Pt100, Pt500, Pt1000, Ni1000, KTY, NTC, LM235Z (other on request)
Circuit type:	2-wire connection
Measurement current:	approx. 1 mA
Electrical connection:	screw terminals max. 1,5 mm²
Leakage resistance:	> 100 MOhm, at +20°C (500 V DC)
Installation length:	50-400 mm
Material:	Protection sleeve: stainless steel VA 1.4571, Immersion sleeve: stainless steel VA 1.4571, Pmax. 40 bar
Cable gland:	PG11 high-strength cable gland with strain relief
Housing:	polyamide with snap closing screws, colour white like RAL 9010
Dimensions:	Housing: L 64 x W 58 x H 34,5 mm, Protection sleeve: Ø 6 mm, Immersion sleeve: outside Ø 9 mm / inside Ø 6,2 mm, thread G1/2 inch
Protection type:	IP65
Storage temperature:	-20...+70°C
Installation:	immersion sleeve with G1/2 inch screw-in thread
Approvals:	CE, EAC, RoHS