Immersion Temperature Sensor with Housing and Flexible Silicone Cable

SKU: TF4/E

Category: Immersion

Manufacturers: FuehlerSysteme

-50...+180°C
PT100, PT1000, Ni, NTC, KTY
installation length 100-400 mm
protection type IP67

Installation length: 100-400 mm
Sensor

Available immediately

from 47,84 €

excl. 19% VAT , plus

This item has variations. Please select the requested variation.

The TF4/E immersion sensor with flexibe silicone cable measures the temperature in the range of -50 up to +180°C in gasiform medium and is with all current sensors available. The length can be defined by pulling out or pushing in the silicone cable. With an optional mounting flange, immersion sleeve or compression clamp the temperature sensor can be mounted directly e.g. on ducts or pipes and replaced quickly and easily in case of service.

Measurement range temp.:	-50...+180°C
Sensor:	Pt100, Pt500, Pt1000, Ni1000, KTY, NTC, LM235Z (other on request)
Circuit type:	2-wire connection
Measurement current:	approx. 1 mA
Electrical connection:	screw terminals max. 1,5 mm²
Leakage resistance:	> 100 MOhm, at +20°C (500 V DC)
Installation length:	100-400 mm
Cable:	0,3 m silicone cable (max +180°C)
Material:	Protection sleeve: stainless steel VA 1.4571
Cable gland:	PG11 high-strength cable gland with strain relief
Housing:	polyamide with snap closing screws, colour white like RAL 9010
Dimensions:	Housing: L 64 x W 58 x H 34,5 mm, Protection sleeve: Ø 6 x 50 mm
Protection type:	IP65 (housing), IP67 (sensor)
Storage temperature:	-20...+70°C
Installation:	immersion sleeve, mounting flange, compression fitting (not in scope of delivery)
Approvals:	CE, EAC, RoHS