Brightness Measuring Transducer for brightness, temperature in room housing, 0-10 V or 4-20 mA, passive

SKU: HFR/A

Category: Room

Manufacturers: FuehlerSysteme

0-20 kLux, 0...+50°C
3 lux measurement ranges
output 0-10 V, 4-20 mA
4-20 mA as transmitter circuit (2-wire)

Output brightness: 0-10 V

4-20 mA
Output temperature: n/a

Ni1000 (glass passivated)

Pt100 (DIN EN 60751 Cl. B)

Pt1000 (DIN EN 60751 Cl. B)
Brightness (preset): 0-1 kLux
Temperature: 0...+50°C

n/a

Available immediately

from 108,43 €

excl. 19% VAT , plus

This item has variations. Please select the requested variation.

The brightness sensor HFR/A registers the brightness from 0-20 kLux using a photo-diode and, optionally, also the temperature from 0...+50°C. For further processing the transducer converts the measuring result into a linear output signal 0-10 V respectively 4-20 mA. 3 different measuring ranges be selected (0-0.5 kLux, 0-1 kLux, 0-20 kLux) which can be switched, according to requirements, by the innovative DIP switching technology. The modern room housing in modern design is specially designed for indoor use. The brightness sensor is optimally suited for an energy efficient control of buildings, such as e.g. controlling the lighting in offices, industrial facilities etc..

Measurement range temp.:	0...+50°C
Measurement range brightness:	0-0,5 kLux, 0-1 kLux, 0-20 kLux
Accuracy:	±10% FS (20°C)
Temperature dependency:	±5% FS / 10 K
Linearity inaccuracy:	< ±5% final value
Sensor:	Brightness: photodiode, Temperature: resistance sensor
Response time (t90):	< 1 s
Sensor protection:	mounted inside housing
Supply voltage analog 0-10 V:	24 V AC/DC (±5%)
Supply voltage analog 4-20 mA:	15...36 V DC (Ubmin = 15 V + RLoad*0,02A)
Current consumption at 0-10 V:	typ. 10 mA
Current consumption at 4-20 mA:	max. 20 mA / output
Analogue output 0-10 V:	3-wire connection, min. load resistance 100 kOhm
Analogue output 4-20 mA:	2-wire connection (transmitter), max. RLoad(Ohm) = (+Ub - 15 V) / 0,02 A
Switching Hysteresis Relay:	2% of the selected scaling (without display), 0,5...5% of the selected scaling adjustable (with display)
Offset:	±10% from the selected measuring range by 270° potentiometer
Electrical connection:	screw terminals max. 1,5 mm²
Running-in time:	< 3 s
Cable gland:	on the back or housing side (predetermined breaking point)
Housing:	ABS polyman, colour signal white like RAL 9003
Dimensions:	Housing: L 82 x W 82 x H 25 mm
Protection type:	IP30
Protection class:	III
Working range r.H.:	0...98% r.H. in contaminant-free, non-condensing air
Working temperature:	0...+50°C
Storage temperature:	-20...+50°C
Installation:	on-wall or on flush-mounted box
Approvals:	CE, EAC, RoHS

Table stand for room housing W / D / H: 105 mm / 60 mm / 120 mm

8,99 € *

Available immediately
Delivery time: 1 - 2 Workdays (DE - int. shipments may differ)