CO air quality sensor for ducts with measurement range switch

CO-K/A


  • 0-200/500/1000 ppm

  • 0-10 V, 4-20 mA, changer

  • optional lcd display

Product Downloads

pdf
Manual
ba_4-4-020
pdf
Datenblatt DE
Datenblatt
pdf
Datasheet EN
Datenblatt

    Information

  • Delivery within 24 h via UPS
    Shipping cost table
  • Do you have questions?
  • Add to cart and ask for a qoute!
  • Simply pay by invoice
  • Availability
  • Request shipping time
  • Add to Cart

Commodity Group 2

SKU CO Output CO Version Price € net / gross * Availability Qty Action
CO-K/A-UIR 0-200/500/1000 ppm 0-10 V, 4-20 mA, change-over contact without display
Excl. Tax: €240.89 Incl. Tax: €279.43
Availability Add to Cart
Delivery Time
CO-K/A-I 0-200/500/1000 ppm 4-20 mA without display
Excl. Tax: €230.29 Incl. Tax: €267.14
Availability Add to Cart
Delivery Time
CO-K/A-UIRD 0-200/500/1000 ppm 0-10 V, 4-20 mA, change-over contact with display
Excl. Tax: €293.95 Incl. Tax: €340.98
Availability Add to Cart
Delivery Time
CO-K/A-UI 0-200/500/1000 ppm 0-10V, 4-20 mA without display
Excl. Tax: €230.29 Incl. Tax: €267.14
Availability Add to Cart
Delivery Time
CO-K/A-UID 0-200/500/1000 ppm 0-10V, 4-20 mA with display
Excl. Tax: €283.35 Incl. Tax: €328.69
Availability Add to Cart
Delivery Time

Request the shipping time for specific quantity:

Ready for dispatch in   business day(s)

Measurement range CO 0-1000 ppm
Scales 0-200/500/1000 ppm
Accuracy ±5 ppm + max. ±5% f. mv (at 20°C, 50% r.H.)
Temperature dependency CO: ±2 ppm / K
Running-in time 1 min
Response time (t90) < 5 min
Long term stability ±1% FS/year
Sensor Electrochemical sensor
Sensor protection sinter filter
Supply voltage 24 V AC/DC (±5%)
Current consumption max. 100 mA
Analogue output 0-10 V 3-wire connection
Analogue output 4-20 mA 3-wire connection
Alarm output 1 x potential-free change-over contact, 48 V, 1 A
Switching Hysteresis Relay 2% FS (without Display), 0,5...5% FS adjustable (with Display)
Electrical connection screw terminals max. 1,5 mm²
Housing Polycarbonate PC UL 94 V0 with hinge locks, color signal white similar to RAL 9003
Cable gland PG11 high-strength cable gland with strain relief
Display optional LCD display with backlight on/off/auto
Material Protection tube: stainless steel V2A
Dimensions Housing: L 89 x W 80 x H 47 mm, Protection tube: Ø 25 x 190 mm
Protection type Housing/electronic: IP65, Sensor: IP30
Protection class III
Working range r.H. 0...98% r.H. in contaminant-free, non-condensing air
Working temperature 0...+50°C
Storage temperature -20...+50°C
Initial operation After switch-on of the device it runs a self-test and the zero-point calibration. This process takes, depending on ambient conditions, about 1 minutes. Within this time, the linear output signal deviates from the actual measured value.
Installation mounting flange (in scope of delivery)
Approvals CE, EAC, RoHS

The duct air quality sensor CO-K/A registers the CO concentration in the air in the environment in the range of 0-1000 ppm via an electro-chemical sensor and converts this measured value into a linear output signal 0-10 V respectively. 4-20 mA. As an option the air quality sensor has a potential-free changeover contact and a backlit display. The display content can be rotated in 90° steps using a menu and the measured value, the switching threshold set, the state of the relay, the MIN/MAX measured values for the selected intervals (1 h / 6 h / 12 h / 24 h) etc. can be read out.
3 different measuring ranges can be selected 0-200 ppm, 0-500 ppm, 0-1000 ppm which can be switched, according to requirements, by the innovative DIP switching technology.

You may also be interested in the following product(s)

CO and temperature sensor for ducts with measurement range switch

CO and temperature sensor for ducts with measurement range switch

Air quality transducer duct for CO, VOC, humidity and temperature, digital output

Air quality transducer duct for CO, VOC, humidity and temperature, digital output